SCSI Floppy Emulator – SCSI Floppy To USB
SCSI to USB Floppy Emulator – SCSI Floppy Drive – SCSI USB Floppy Drive
FlexiDrive is perfect to replace all TEAC SCSI Floppy Drives on industrial, technical or professional equipment.
FlexiDrive is working with the existing TEAC FC-1 SCSI Interface Board on the machine. *TEAC FC-1 SCSI Interface Board is not included.
All SCSI Setup supported. DOS compatible formats and NON-DOS formats and file systems.
Compatible with the followings TEAC SCSI Floppy Drive Units:
TEAC FD-235 HS 1011
TEAC FD-235 HS 1111
TEAC FD-235 HS 1211
TEAC FD-235HF-C700-U
TEAC FD-235HF-7700-U
TEAC FD-235HF-A700-U
TEAC FD-235HF-C700-U
TEAC FD-05HGS Slim SCSI
and others.
All your programs, files and backups on a single SD or USB Stick!
No more Floppies!
You can storage up 2500 floppies on a single SD card or USB Stick.
FlexiDriveS-SD FlexiDriveS-USB FlexiDriveMV-SD FlexiDriveMV-USB
Share this with your friends
Can the FlexiDrive replace a Teac FD-05HGS? If so, can you provide a quote?
Dear Kevin. Thank you for your interest in our products FlexiDrive.
FlexiDrive is the best solution to replace a Teac FD-05HGS SCSI floppy drive unit.
We have sent all the information to your email address.
Thanks and Best Regards.
The FlexiDrive Support Team
Dear Young Sik Kim
FlexiDriveS-USB is ok to replace the Teac FD-235HF SCSI floppy drive on all Grosse machines like C12, C13, C15.
The biggest file that you can transfer is a fie of 1.44MB.
You also can use a FlexiDriveMV-USB, then you can store up 2500 Grosse floppies on a single USB stick. If you have some more questions, feel free to contact us.
Thank you and Best Regards. The FlexiDrive Support Team.
Can you e-mail the prices and documentation for the FlexiDriveMV-USB?
Yes. We are sending you a quotation and documentation during the next two hours.
Thank you and Best Regards. The FlexiDrive Support Team.
I want to install the FlexiDriveS-USB on the textile machine grouser jacquard controller c12, c13, c15.
The Grosse controller is equipped with a Teac FD-235HF SCSI floppy.
Is it possible to transfer even if the file size is more than one floppy disk?